23 Nov
2005
23 Nov
'05
8:37 a.m.
Hi Jeff,
Did you ever send those DG boards to anyone?
If you did, could you give me their email address or name so that I can add
them to my DG reference list in case I need to contact them in the future?
----- Original Message -----
From: "Jeff Davis" <jdaviscl2 at soupwizard.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Sent: Monday, July 18, 2005 4:03 PM
Subject: Re: Rescued: Data General Nova Boards
Ok, I received a few interested responses, so I set
the boards aside
somewhere
safe until I get back from my trip. Will figure out
who gets what in 3
weeks
or so.
And, to answer a common question, there were no other DG parts or chassis
there. I'll have a friend who frequents the surplus store ask around and
see
if he can find out if there still is a DG on campus.
I suspect these were
either spares or pulled from the DG when it was scrapped some time ago,
and
they were found when cleaning out a storage room
(based on the types of
stuff
I found in the same bin the boards came from).
If I'm wrong, maybe we'll get lucky and the chassis or drives will show up
in
this week's surplus drop-off (and that my friend
will spot it).
Jeff
> Hi, I was at my local uni surplus today (UC Santa Barbara) and found,
buried
> in a bin of random industrial parts from the chem
lab, some Data General
Nova
> boards. Here's what I found, if anyone would
like to help me identify
them
> further:
>
> These boards are 15 x 15 inches:
>
> 107-000187-12X Disk Cartridge Controller, DGC Nova
> 107-000007-02 DGC Nova Extender Board (quantity 2, one with gouged
traces)
> 107-000055-03 DGC D-A Converter Scope Control
Card Reader
> 107-000054-02 DGC General Purpose Interface
> 107-000151-17-16 DGC Nova Cassette I/O
> 107-000094-00 DG Nova Compatible Wiring Board (quantity 2)
> D-10632-01 Data Channel Linc Tape, CO3000N Option 008
>
> The wiring boards look to be prototyping boards, they are half filled
with
> soldered sockets and hand-wired components.
>
> These boards are 6.5 x 3.25 inches, and have no obvious plug connectors:
>
> 107-000008-01 DGC (no other writing, quantity 2)
> These look like prototyping boards also, with rows for sockets and wire
wrap
> posts on either side. Each has different
components wired up.
>
> I don't have any DG stuff, and it's unlikely I'm going to acquire one in
the
> near future (still working on my Sun 2/120), so
eventually these will go
to
> someone else. I'll be leaving Sunday on a
trip until Aug 10th, but I'll
try
to take some
photos of the boards tomorrow or Saturday (if anyone is
interested in them).
Jeff
_____________________________________________________
This message scanned for viruses by CoreComm