4 Mar
2005
4 Mar
'05
2:26 a.m.
John Willis <willisjo at zianet.com> wrote:
Back panel:
There is a toggle switch. Two settings. One with an empty circle with a
dot above it, and one
circle with a dot in the center. It is set on the empty circle with the
dot above. (down position).
This is the halts disabled position. Set it to dot-in-the-circle (halts
enabled) and it should give you the >>> prompt.
In the halts disabled position is attempts autoboot. I assume that the
hang you are seeing is the result of autoboot not succeeding / looping.
Setting the dot in the circle will disable autoboot and give you the console;
you can then check your system out manually.
MS