28 Aug
2020
28 Aug
'20
9:34 a.m.
Check to see if JMicron's sata(drive) to ide(host) is suitable to your
need. They also come with bi-directional switch to select which end goes to
the mainboard. ypu can connect a big ssd or a sata to M2 adapter. But be
aware they have two problems:
- they need +5V power supply, either from the fdd connector or from USB;
- they do not get along with Sun Ultrasparc systems: the sata hdd is
always read-only.
You can also get a pci sata controller.
On Friday, August 28, 2020, Warner Losh via cctalk <cctalk at classiccmp.org>
wrote:
On Fri, Aug 28, 2020 at 10:19 AM Al Kossow via cctalk
<
cctalk at classiccmp.org>
wrote:
On 8/28/20 9:07 AM, Noel Chiappa via cctalk
wrote:
There's also a crap-ton of SATA<->PATA adapters that I've used to good
effect everywhere except in space constrained situations (think laptop).
Warner
I've decided that
I should see if there's an IDE emulator (using SD cards) available I
could
switch to.
You may want to use PATA
disk-on-module.