25 May
2016
25 May
'16
6:16 p.m.
On 2016-05-25 9:46 PM, Chuck Guzis wrote:
On 05/25/2016 05:17 PM, Paul Berger wrote:
Yeah I watch some of the large system guys disassemble and repair trains
and of course when you put them back together you had to make sure the
slugs where all in the right order. We had customers that would buy
3rd party ribbons that where practically dripping with ink that would
gum up everything in the machine. The other problem we had with 3rd
party ribbons on 3203 and 4245 was some would be too transparent and
would mess up the tracking sensor so the ribbons would go off one side.
I only ever saw one of the drum style high speed printers and I think it
was a Honeywell wavey line printer. I remember the operator demoed it
for us by printing a picture, if you printed a whole line of the same
character it would fire every hammer at the same time, it was very
noisey. The 1403 limited the number of hammers that could fire
simultaneously, for testing the CEs had what was called train breaker
routine that would exercise the printer firing the maximum number
repeatedly.
Paul.
The train printers where amazing technology but
what often killed
the trains was an operator who neglected to top off the oil
reservoir, if the train went dry they would literally screech to a
halt. It was always interesting when someone put a carriage control
tape on backwards or didn't lower the brushes, the first skip would
empty the box and the paper would be all packed up under the cover.
The CE's
nightmare for the 512 was a ribbon that started to disintegrate
and become lodged in the train. As I've witnessed, it involves a
container of solvent and a brush and completely disassembly of the
train, scrubbing each type slug carefully, the putting the whole mess
back together. Can you say "dirty filthy frustrating work?"
--Chuck