30 Mar
2019
30 Mar
'19
4:21 p.m.
On 3/30/2019 2:25 PM, Charles via cctalk wrote:
I have a PDP-11/23+ and the power supply (H786)
"last ran when parked" a
year or so ago. But there's no DC output at all today, and the fans are
running so there is AC power...
I also have the original H7861 that came with it, which had a blown
chopper transistor. I couldn't find anything else bad, so I replaced the
transistor and within a few seconds of running, it blew again. :(
So I need some help - I've never been good at fixing switching supplies,
not to mention the high-side hazards.
The simplest solution would be just to replace it with a working unit.
Anyone got one to sell, hopefully cheap? :)
If not, can anyone fix one or both of mine?
thanks!
Charles
Sorry, no spares (and certainly no tested spares. ;) ).
My playbook for these sorts of things goes like this. Others will
undoubtedly chime in with probably better advice.
1. Is anything obviously burned / overheated / fuses blow? Note those,
and what feeds them.
2. Check the semiconductors - often I will lift one leg of a diode
or two legs of a transistor to make sure I get a good test.
It's a pain, but usually worth it. Sometimes, depending on
what the schematic looks like, I'll test without lifting as many
/ any legs.
3. Specialized regulators / op-amps, etc., require checking their
voltage while running. Not usually easy to test them.
4. Check the capacitors, especially input and output for excessive
leakage. I often will reform input and output caps just
because. Check their ESR, at least with one of the
cheap component testers out there.
I use one of these for testing, as well as an ohmmeter, etc.
https://www.ebay.com/itm/All-in-1-LCR-Component-Tester-Transistor-Diode-Cap…
I also use a "Blue ESR Meter" of late, as well:
https://anatekinstruments.com/products/anatek-blue-esr-meter-full-kit-for-s…
But before I had these, I just used an ohmmeter to test each
semiconductor junction, and monitored voltage while reforming capacitors
to get an idea of their ESR.