2 Aug
2006
2 Aug
'06
2:51 p.m.
I'm just curious; I picked up a PDP 11/05 last weekend, but instead of the
processor cards laying on their sides, these were standing up. This resulted in
a configuration with two other plastic covers (one about 1" high below the
standard 11/05 front panel, and the other about 7" above the front panel.) Is
this a standard or optional chassis for the 11/05? I also picked up the dual
There was a standard configuration for the 11/05 in the BA11-K 10.5" high
mounting box. It sounds like this is what you have. The main differences
are a totally different backplane, more space for expanison (obviously),
a different PSU obviously) and that the console terminal cable plugs into
a little dual-height board that plugs into the CPU backplane.
-tony