Fast Eproms CY7C291 Data?

I want to bould my own PDP11 some day but in an other way as other people here :-) I want to build an Bit Slice CPU out of AM2901 Chips to emulate the PDP11 CPU. As a prt of the design I'LL need some very fast Proms for the microcode and I've found the AM27C291,TMS27C291 and CY7C291 Chips, they are fast and big enough (2Kx8 and 25-35ns). I'mm looking now for a data sheet from the CY7C291 that describes the programming algorithm, getting a datasheet is easy on http://www.datasheetarchive.com/ but there is this sentence in the text: "Programming Information Programming Support is available from Cypress as well as from a number of third party software vendors. For detailed programming information, including a listing of software packages, please see the PROM Programming Information located at the end of this section. Programming algorithms can be obtained from any Cypress repesentative." Ok, so far so good. I don't know of what end of which section I schould look for the programming information, since I don't know from where the datasheet was scanned from. I've contacted Cypress itself some time before..to make it short: they failed. The sold the entire Eprom bussines years agao (forgot to which company) but wheter cypress nor the new company has the required information or want to share them. So please: Maybe someone has this old databook from cypress and could look "at the end of this section"? I got the algorithm for the TMS in a datasheet, but according the german company "Conitec" that makes programmers (have a GALEP-III from them) that seems to be not the same on the CY7C291. The guy there couldn't program my samples I've sent to him. Any help? Regards, Holm -- Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583 www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741