25 Sep
2019
25 Sep
'19
8:24 a.m.
On Wed, Sep 25, 2019 at 3:12 PM Noel Chiappa via cctalk
<cctalk at classiccmp.org> wrote:
I have 4 or 5 DJ11s I think (they're a 4 slot backplane + boards
IIRC), the current loop
version. None are in use at the moment though.
I should have the printset for them too. The problem is that I do not
have access to an
A3 scanner (and to be honest the way that my scans have been ignored
in the past I am
not too bothered about finding one!)
-tony
What is
missing, however, is an engineering manual with the schematics.
Well, the M7820's will be the same as in the DH11. The M7285 and M7279 are
DJ11-specific, though.
I was going to say that 'does anyone even have any DJ11's any more, to need
the drawings' (they're like lobotomized DZ11's - the serial line config is
done with jumpers!), but on looking it turns out the RICM probably has some in
their -11/45's.