At 08:36 PM 12/15/01 -0700, you wrote:
A PC floppy cable certainly wouldn't work with the
Little Boards I have, since
they use the standard floppy disk cable, which has no twists or cuts.
Dick
it should work if both drives were strapped at DS1 (iirc) all the flop does
is swap the drive select lines around so IBM (and clone makers) didn't have
to change any jumpers on the drive. I've used twist floppy cables in
morrow, Kaypro, and a few other CP/M boxen when I was in a hurry to get a
machine back up and going...