Hi Tom,
what do you think about this parts:
Microsoft Word - D5936.doc (mouser.at)[2]
Looks like 0.09" diameter.
With best regards
Gerhard
Zitat von Tom Hunter <ccth6600 at gmail.com>:
Hi Gerhard,
?
I used the following banana plugs:
?
https://www.aliexpress.com/item/1005002907717547.html
?
Please note that only about 30% of the plugs I received were a
good fit. The rest I had to modify.
?
I had to remove the barrel shaped contact spring and compress it
carefully to open it up to make good contact with the sockets.
I also soldered the barrel shaped contact spring onto the
plug body. It is a lot of work to make the patch cables with plugs
which don't quite fit, but with the modification the result is now
neat and usable.
?
I couldn't find anything else with a better fit. The original 0.1"
taper pins are "unobtainium".
Regards
Tom
?
?
On Sun, Mar 13, 2022 at 7:18 PM DI Gerhard Kreuzer via cctalk
<cctalk at classiccmp.org> wrote:
Hi,
? ? I also have an H500 waiting for restoration.
? ? Maybe anyone can give better winfos about the
plugs/connectors of the
patch cables.
? ? I didn't have any, I have to make new.
? ? With best regards
? ? Gerhard
? ? Zitat von cctalk-request at
classiccmp.org:
> Send cctalk mailing list submissions to
>? ?? ? ? ? cctalk at
classiccmp.org
>
>? ?To subscribe or unsubscribe via the World Wide Web, visit
>? ?? ? ? ?
http://www.classiccmp.org/mailman/listinfo/cctalk
>? ?or, via email, send a message with subject or body 'help' to
>? ?? ? ? ? cctalk-request at
classiccmp.org
>
>? ?You can reach the person managing the list at
>? ?? ? ? ? cctalk-owner at
classiccmp.org
>
>? ?When replying, please edit your Subject line so it is more?
> specificthan "Re: Contents of cctalk digest..."