4 Feb
2003
4 Feb
'03
6:20 a.m.
Ethan,
I needed to do the same and so I made my own adapter. In my case, I
needed a PLCC32 to DIP to burn a 32Kx8 PLCC OTP PROM, so I took
a 28 pin machine socket and wired it to a thru-hole 32 pin PLCC socket.
Here is a pic:
http://www.ubanproductions.com/Images/plcc_to_dip.jpg
Yes, you can certainly buy adapters like this (only more professional)
from most of the companies that make programmers, but
they are pretty
pricey -- probably $100+.
--tom
At 11:49 AM 2/4/2003 -0800, you wrote:
I am needing to burn PLCC-packaged chips in my DIP
programmer. I
expect I need to locate a PLCC<->DIP adapter of the right size
(for 29C010 and 28F101 Flash chips, at the moment). Thinking about it
made me wonder if any of the sockets were ZIF or LIF.
Any ideas? Any recommendation on a source for adapters?
Thanks,
-ethan