Sounds nice. Are there any chances to ship this system in europe?
Regards,
Wolfgang
BTW: I think it's a bit OT, but I have a nice DEC P9000 System
available. Boots nicely Unix System V. Some Docs and Terminals are
available too. Drop a line if somebody is interested.
--- Jay West <jwest at classiccmp.org> schrieb:
I received an email about a PDP system being
available. This system
MAY be
spoken for tentatively, but because the guy is in a hurry I wanted to
get
the word out in case the current candidate doesn't want it.... System
description:
------------------
The PDP-11/73 is 19" rack mounted (rack not included). It consists of
the
main cabinet (CPU, RAM, I/O, RM02 100 MB disk), expansion unit with
two 300 MB Disk (at least one of them OK) and another unit with a
1/2"
tape drive.
RAM: 512 kb (not quite sure about it, can be less),
I/O: Ethernet, 4 x rs-232, real-time clock card, GPIB controller(NI),
ADC (NI), parallel port, CAMAC interface.
It was running RSX-11M 4.2 and DECnet (don't remember version).
We have all manuals (RSX+DECnet) and tapes with the OS software.
Please let me know if there is anybody interested a.s.a.p. - I can't
store the system much longer.
--------------------
And... the system is located in Uppsala, Sweden. While the subject of
price
hasn't been broached, I am under the impression it's available for
the
carting away, but there may be a small fee. If anyone is interested,
drop me
a line and if the primary candidate doesn't want it, I'll draw
numbers out
of a hat :) This system must be picked up immediately!
Jay
====================================================
Ing. Wolfgang Eichberger cell.: +43-664-240-65-92
http://www.eichberger.org
email: wolfgang at
eichberger.org
----------------------------------------------------
Gruentalerstr. 24 - 4020 Linz ? AUSTRIA
====================================================