21 Nov
2014
21 Nov
'14
7:06 a.m.
On 11/19/2014 1:43 PM, tony duell wrote:
I assume there's no chance of me finding a top
connector for the memory system. Am I right that the
only difference between the 2 flavours is the spacing of the edge connectors on the PCB?
Due to the
fact that the connector plugs into the core plane daughterboard, which is fitted on the
component side
of the sense/inhibit board, so the spacing between the edge plugs changes depending on
whether the
core is to the left or to the right of the address driver. Both top connectors seem to be
just pin-pin
wired on the PCB, but the manuals don't really mention them.
There's a chance I can come up with a connector, but won't be able to
look until the beginning of December.
I'll look and see what I have. I was given a box of them that were
removed from 2116c's (same core as the 2100).
One major problem concerns the power switch. I don't have the key, and it's
currently in the
'panel lock' position. Now, I can trivially jumper the switch to enable the panel
but I would
rather not.
I have eleven 2100's and they all use the same key. Doesn't mean that
all 2100's do, but mine did.
I can send you a key if you want.
Bob