Prime documentation

Dennis, On Wed, Mar 11, 2020 at 04:32:00PM -0400, Dennis Boone via cctalk wrote: That might have worked. There were some prompt differences in the next section compared to the install guide: **** MAKE <Rev. 22.1.4> **** Copyright (c) 1991, Prime Computer, Inc. Enter command line options: -disk -part -dt -ac -badlev -baud Physical device? 2060 Partition name? cmddev Disk type must be one of the following: SMD 80MB or 300MB removable CMD Cartridge module device 68MB 68 megabyte fixed media 158MB 158 megabyte fixed media 160MB 160 megabyte fixed media 600MB 600 megabyte fixed media MODEL_4475 300 megabyte fixed media MODEL_4714 84 megabyte fixed media MODEL_4711 60 megabyte fixed media MODEL_4715 120 megabyte fixed media MODEL_4735 496 megabyte fixed media MODEL_4719 258 megabyte fixed media MODEL_4845 770 megabyte fixed media MODEL_4721 328 megabyte fixed media MODEL_4860 817 megabyte fixed media MODEL_4729 673 megabyte fixed media MODEL_4730 213 megabyte fixed media Disk type? 160mb Level of bad spot checking? (default = 4) 0 Baud rate? 9600 Which file sectoring scheme would you like? Type "0" (Reverse Sector) or "1" (Forward Sector) Making 8 head partition CMDDEV Tracks: 821 Sectors per track: 9 Partition is using Reverse Sectoring Partition is in -All_Controller Mode Partition size in decimal records: 58910 Unable to get badspots from device: 002060 Continuing with make. (MAKE) Partition CMDDEV created successfully. After the above I have a 506K disk image file. Are any changes needed to the make options in the following section to create the paging space? Your online guide has: -disk -split -part -dt -new -ac -badlev -nin -nfl -sec -- Kevin http://www.RawFedDogs.net http://www.Lassie.xyz http://www.WacoAgilityGroup.org Bruceville, TX What's the definition of a legacy system? One that works! Errare humanum est, ignoscere caninum.