3 Feb
2021
3 Feb
'21
4:44 p.m.
On Wed, Feb 03, 2021 at 10:43:48AM +0100, Enrico email.it wrote:
A very dear friend first read in raw mode a 10MB Winchester hard disk model
Shugard SA1004 from which the files were correctly extracted and then set up
a test bench from which you can see in this video the complete system
operating with the HD ed il controller Shugart SASI SA1403:
https://www.dropbox.com/s/d9iacfgrnexso3o/GP%20T20%20con%20HD%20banco%20prov
a.mp4?dl=0
Despite we having attempted different readings (even using cards from the
first hard disk), using the same FLUXengine card
(http://cowlark.com/fluxengine/doc/building.html) the raw file still does
not present the Hard Disk directory, instead we read the information of the
files present but there may be bad bytes in these files and in the rest of
the disk as well.
I have only heard of FLUXengine being used for floppies. Can it handle
hard drives? I hadn't heard of other boards that can read MFM hard drives
other than mine http://www.pdp8online.com/mfm/.
Other than the drive being faulty the biggest reason reading fails is
the heads are no longer on track. You can tell that by looking at a histogram
of the flux transition timing for a track. If they show peaks with
good nulls between them the data is likely recoverable. If they don't
you have to do something to shift the head position.
Example histogram from by unit for ST506 type drive.
https://groups.google.com/g/mfm-discuss/c/kjKez8vfapU/m/4XamyQJgCAAJ
The SA1004 is a stepper drive. Some people have had success on other stepper
drives with putting some rotation force or drag on the stepper to shift the
heads. Creating a microstepper driver would give better control.
May be able to say more if you provide more information on what you have
done and checked to try to recover the contents.