15 Dec
2004
15 Dec
'04
9:37 p.m.
On Wed, 15 Dec 2004, Dwight K. Elvey wrote:
Well, I would have had the wires not broken off on the last whack that got
the casing opened :( As it is I cannot tell what each one was connected
to.
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
From:
"Vintage Computer Festival" <vcf(a)siconic.com>
On Wed, 15 Dec 2004, Michael Sokolov wrote:
Hi Sellam
Do all the pins show low ohms to each other? It might
be a center tap or even just a ground lead that doesn't
carry current. Since you have the box open, you should be
able to see where all the wires go. Vintage Computer Festival <vcf(a)siconic.com>
wrote:
Ok, that's good information, but for good measure it would be nice to know
what the voltage is across the middle pin and either end pin.
Thanks!
Because there are three conductors sockets on the
end plug and I don't
know what is supposed to be on each one.
Well, 20 VAC between the ends, don't know about the middle.