Alex,
On Tue, Sep 16, 2014 at 6:34 PM, Alexandre Souza <
alexandre.tabajara at gmail.com> wrote:
400mA makes a lot more sense than 4A.. but may I ask what your source is?
----- Original Message ----- From: "drlegendre ." <drlegendre at
gmail.com>
To: "General Discussion: On-Topic and Off-Topic Posts" <
cctalk at classiccmp.org>
Sent: Tuesday, September 16, 2014 3:59 PM
Subject: Amiga 2000 controller port fuse strangeness
Trying to help out a friend, he's unable to get the mouse working on his
Amiga 2000. We've determined that the +5V
line(s) on the DB-9 controller
ports are dead, which would tend to account for the non-working mouse.
That
is, I assume the mouse electronics draw their power from the +5V pin.
So the +5 pin on each of the two ports lead back to a common point, which
is a fuse.. thing is, it's a surface-mount fuse, and it's marked 4A.. as
in
FOUR AMPS.
Now the schematics we have do show the fuse, I believe it's indicated as
F1. But there's no rating on the diagram. Can anyone confirm that this is
actually a 4A fuse? Why on earth would they have such a high-rated fuse
protecting those lines?
What sort of controller-port peripheral device could ever need that much
current - and is a common DB-9 connector (or for that matter, the PC board
traces) even capable of that kind of current?
400mA maybe?