18 Feb
2011
18 Feb
'11
1:51 p.m.
The commodore monitors I have seem to use the same switch found on AT PC
power supplies. I fixed a 1802 using one, and my 1084 will get fixed that
way sooner or later (it is stuck in the on position and I use a surge strip
to turn it on and off).
----- Original Message -----
From: "Jim MacKenzie" <jim at photojim.ca>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Sent: Friday, February 18, 2011 11:19 AM
Subject: Re: Commodore 1084S monitor
----- Original Message -----
From: "Chris M" <chrism3667 at yahoo.com>
To: "talk" <cctalk at classiccmp.org>
Sent: Tuesday, February 08, 2011 5:58 PM
Subject: Commodore 1084S monitor
Anyone familiar w/this unit? The power switch in
the back won't stay
engaged (you press, and it clicks, and power comes on, but it pops back
out, and monitor shuts off). I imagine there's probably a part # on the
switch, but I forgot to look this afternoon. Asked in case anyone's
familiar w/it.
That's a common failure. I had one fail once, and had to get it replaced.
Jim