1 Mar
2018
1 Mar
'18
11:37 a.m.
----- Original Message -----
From: "devin davison" <lyokoboy0 at
gmail.com>
To: "Jon Auringer" <auringer at tds.net>
Cc: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at
classiccmp.org>
Sent: Thursday, March 1, 2018 12:51:14 PM
Subject: Re: Picked up a couple 386 machines
It is the 2500 SX. The drive is a quantum prodrive LPs 105 AT.
The drive spins up but is not recognized.
That is a very standard IDE drive that you can replace with just about any IDE drive you
can find, at least to get things up and running. The controller won't support the
faster transfer speeds of later drives, and may not support the full capacity of the
larger drives, but the newer drives should be backward compatible. Something in the 500MB
range would probably be a good choice. Also, looking at the information I have on the
motherboard the drive controller can't be disabled. You may be able to add a secondary
drive controller, but booting from the hard disk on that controller _may_ not be
possible.
>> The tandy 2500 is pretty nice as well, it has
a cdrom and a hard drive
>> installed, although the hard drive is dead and seems to only accept AT
>> hard drives.
>
> Which model of the 2500 did you find? the 2500 SX/20, SX/33 & RSX
> motherboards all seem to have built-in IDE drive controllers. What model
> is the hard disk?
-Jon