What's CIS for? (was RE: Original 11/74 front panel)

Yes, I read that 11/74 is in the newest release of E11, and that you have put in a lot of good work together with John. But I have never looked into the possibility to connect switches and lights to work with E11. (I did built the 16 LEDs connected to the parallel printer port, but that is not a "complete" panel). In SIMH, I can hack around to connect what I want :-) E11, from V4, provides hooks, but as said, I did not dive into that. - Henk. ________________________________ Van: cctalk-bounces at classiccmp.org namens Johnny Billquist Verzonden: za 11-02-2006 00:52 Aan: cctalk at classiccmp.org Onderwerp: Re: What's CIS for? (was RE: Original 11/74 front panel) And e11 V5 actually have the 11/74 implemented, along with the other stuff needed for multiprocessor PDP-11s. And it works, even if it is a bit tricky to set up, and not really documented any good. Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at update.uu.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol This message and attachment(s) are intended solely for the use of the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law. If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by telephone and with a "reply" message. Thank you for your cooperation.