Looking for HP Laserjet IIp+ power supply

Actually I just fixed it ;) <Emily Litella> Never Mind. I took the supply all the way apart and found one secondary filter cap that had leaked electrolyte. Cleaned and fixed that, but still no luck. 155 volts on the main filter cap. Then I noticed that occasionally it would try to start for a blink but then the voltages would just drop to zero. So I started looking around the section that had to be for bootstrap power to the switching regulator, a common TL494 chip with datasheets online. Sure enough, a small electrolytic on the primary side had blown its bottom out. The diodes around it were still good. Changed that cap and a couple more suspicious looking small ones and the voltages came right up (including the 24V once I pushed the cover-open microswitch). Put it back in the printer, screwed it all together (a very modular design for easier field servicing) and fired it up. Test page printed perfectly. Saved some $ on a new laser printer. For now :) I like these old cinder-block-sized (and weight) printers too. They last ALMOST forever... Charles