truckload of PDP stuff

Just to let you know it all showed up today (about a week early). Because I didn't receive any (significant) notice, I didn't take any pictures...you'd have been disappointed anyway. It was 2550 lbs of stuff on 3 pallets stacked to 4'. The are some interesting items, but nothing there that doesn't require a fair amount of TLC. I think if it were an ad for a used car it would be "some work required". :-) Here's a list of the major items: * RL01 (2) * RK05 (2) * 11/34 (3) * 11/05 or 11/10 (can't tell, part of front panel missing) * 11/40 mostly complete but has front panel whose switches were abused (broken/missing). The plexi is intact. * 11/40 badly abused. Front panel (and switches) intact (missing 1 switch cover) * 11/50 (I was jumping up and down when I saw this until I figured out it had no cards...nada.) * BA11F expansion box full of cards (21") * RK11D (2+) * RK11C (2) * TU60 * RX01 (or RX02) pretty horrible shape though * VT100 + 4 keyboards (all missing some keys) * various communications bulkheads * hardware (rails, doors, etc) In going through one of the small boxes I found a very strange looking cable. It had flip chip paddles on one end and centronics connectors (2) on the other. The cable itself was twisted pair wire bunched together. It took a few minutes to realize that this cable goes to between a Fabritec memory expansion and an 8/I. This cable is completely undocumented!!! -- TTFN - Guy