28 Sep
2003
28 Sep
'03
7:37 p.m.
What's the problem with you guys??? The Unibus is
really simple to get
right. :-)
One thing you should know about the 11/84 is that you
don't use wire >wraps
on the backplane for the NPG slots in the CPU box.
The M7677 (MDM) have NPG switches for all card slots instead. Go to >that
card and check it out...
---------------------------------
I am having a similar problem, but my system does not have an M7677.
Mine is an 11/84E. The CPU is in slot 1, memory cards in slots 2 and
3, and the Unibus adaptor in slot 4. 5 and 6 are empty, 7 and 8 have
the UDA50, and 9 has a printer card of some sort. For mine the NPG
grant jumpers are actually on the bottom of the backplane. I have set
them for where the boards are not.
I had believed this system to be configured as working, but it is not.
It has a second backplane but had no M9202. If I put the terminator
in slot 9 of the primary backplane it hangs. I know the UDA50 needs
the NPG out. I will have to examine to see if the printer card needs
it or not. I would guess the Unibus adaptor would not?
Tim Radde
_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!