19 Apr
2005
19 Apr
'05
4:40 a.m.
At 07:09 PM 4/18/05 -0400, you wrote:
On 18 Apr 2005 at 12:27, David Comley wrote:
Ahh! That's something that I didn't know. On the 9000 200 and 300s they
can use any unassigned address.
Joe
Does that flexible disc address come in to play
if the unit is
configured as 4 x 1.15MB drives ? Perhaps I need to set that address
instead.
The 9133 (hard + 3.5" floppy), 9134 (hard only), and 9135 (hard + 5.25"
floppy) used the same controller, so the floppy address switches on the
9134 don't do anything. They're active on the other two models.
Although you may already know it, it's probably worth mentioning that the
64000 system hard disc must be at address 0, a system line printer must be
at address 1, stations must be at 2-7, and one of the stations (or the only
one) must have the rear-panel master/slave switches set to "master,"
according to the 64000 configuration guide.
-- Dave