Syquest Sydos Puma 88

Still trying to find a DOS driver to use my newly acquired Sydos Puma 88 Drive I found this information of Syquest's web site but was not able to find the drivers they mentioned. Does anyone have one of these units or know where I can find the drivers and manuals ? Thanks.. Phil http://www.syquest.com/support/tb8010.html TB8010 - SyDOS PUMA Subsystems The SyDOS PUMA 44 and 88 MB units were produced for the PC marketplace by the SyDOS division of SyQuest. SyDOS was a division of SyQuest located in Florida. Its function was to provide products for the DOS marketplace. Some of its parallel port products used the SyQuest SQ555 and SQ5110 SCSI drives in a subsystem with a parallel to SCSI adapter card, power supply, etc. This hardware interface card with the SyQuest drivers installed the SQ drives into the DOS 3.0 through 6.22 operating systems. The manufacturer of the hardware PP to SCSI interface is no longer in business. With the release of Win'95 requiring some additional hardware interface support, the PUMA units can not be updated to be Win'95 compliant. This additional hardware requirement makes the update to Win'95 real mode drivers unavailable. On some systems the PAR driver can install the PUMA unit in the DOS Compatibility mode. This greatly depends on the hardware in your PC system. The PUMA unit was developed before the release of Win'95 and the ECP/EPP hardware. Some older 486 class PCs should be able to install the PUMA units in the DOS Compatibility mode. The newer the PC, the less likely the installation will be successful. SyQuest drivers, utilities, and readme files are in our download section or ftp.syquest.com. The PUMA1.ZIP and PUMA2.ZIP files are the two files containing the driver and utilities for these units. You must use PKUNZIP to extract the driver and utilities.