28 Aug
2021
28 Aug
'21
8:22 a.m.
On 8/27/21 10:22 PM, Mike Loewen via cctalk wrote:
?? What's the recommended method for adjusting the track 0 switch and
track 0 stop on a Tandon TM100-2, if you don't have an alignment disk? I
do have a scope.
Just use a known-good disk and adjust for best results. That's about
all you can do without a calibrated reference floppy.
There were also non-scope digital alignment disks with sectors recorded
at various offsets and azimuths from ideal. Those could be handled by
simple code that read sector IDs.
--Chuck