On Wed, 17 Jun 2009, Tony Duell wrote:
I would soooo
love to run my C128D, but I can not find a power supply
for it - The use of the proprietary plug has been a pain, and I have
more than once been 'just about to' put a commonly available power
socket on to the box.
Does anybody have any ideas?
I don't know about the -D model, but the plain C128 uses the same power
connector _although not the same PSU_ as some Amiga models. Possibly you
could get a dead PSU from one of those and raid the plug from it.
The plain C128 needs +5V and an isolated 9V AC input IIRC on a DIN like
plug with a square outer shell and 5 pins in a quincuncial arrangement.
Alternatively solder wiees to the right points on the PCB inside the
C128D and run them out to a normal connector. You can easily reverse that
(desolder the wires) if you get the right PSU.
I know we went through all of this several months ago ("Do the Commodores
really need the 9VAC?"), but my 128D has an AT power supply in it,
therefore is not feeding the system with 9VAC, and is functioning
perfectly well.
I've even pulled the PSU out of a 1571 and use an external Molex from the
AT PSU in 128D to power the 1571. In my mind I say it is more efficient.
No empirical proof of this, however. :)
- JP