21 Feb
2013
21 Feb
'13
3:50 p.m.
On 2/21/2013 2:50 PM, Brent Hilpert wrote:
On 2013 Feb 21, at 3:10 AM, allison wrote:
> On 02/20/2013 10:14 PM, Brent Hilpert wrote:
>> On 2013 Feb 20, at 11:01 AM, Holger Veit wrote:
>>> Am 20.02.2013 15:04, schrieb Allison:
>>>> On 02/20/2013 04:17 AM, Holger Veit wrote:
>>>>>
>>>>> What you have to set the terminal to depends on the jumper
>>>>> settings on the board. It also depends on the monitor itself -
>>>>> there is an ACIA version which can work with 9600 8n1, but there
>>>>> is also a Baudot TTY version.
>>>>>
>>>> There is no baudot TTY option its a 20ma serial loop option
>>>> commonly used for the asr33.
>>> This was referred to in the listing as "Baudot". You're right,
this
>>> is not 5 bit baudot/murray code. It is bit-banging tty, in contrast
>>> to an ACIA, though.
>>
>> According to the ref'd manual there is a 'Baudot'/5-level option. To
>> quote, page 21:
>>
>> BAUDOT TELETYPE OPTION
I have a tape I have deciphered which
my Uncle Bill put in a letter to
home during his service. I will point you all at my public folder on
dropbox
https://www.dropbox.com/sh/tcx3brnb8oqpvjz/KVNw58LSbN
in rtty-tape folder. I had my cousin (his daughter) scan it in sections
(was the best I could do). I took those scans and converted it to 5
level information and then hunted for codes that made the most sense.
Jim