HP & Compaq

Have you brought up an interim fix - either clip the ties and support the cat5 bundle off the conduits? OR untie it, wrap the bundles with common aluminum foil (yeah it works) and then retie them using looser cable ties? Might be a nice way to pick up a few extra bucks on a weekend and make them happy at the same time. -> -----Original Message----- -> From: owner-classiccmp(a)classiccmp.org -> [mailto:owner-classiccmp@classiccmp.org]On Behalf Of Douglas Quebbeman -> Sent: Friday, September 07, 2001 8:01 AM -> To: 'classiccmp(a)classiccmp.org' -> Subject: RE: HP & Compaq -> -> -> It would have helped if the installers (before my time) -> hadn't wire-tied the cat 5 runs to the nearest 110v A/C -> lines... three-foot parallel runs, in fact... -> -> and management refuses to believe we need to re-cable.. -> I was even threatened by my supervisor-at-the-time and -> told not to bring it up again, as it would be a 5-digit -> refit cost. -> -> -dq -> -> > -----Original Message----- -> > From: Russ Blakeman [mailto:rhblakeman@kih.net] -> > Sent: Thursday, September 06, 2001 9:53 AM -> > To: classiccmp(a)classiccmp.org -> > Subject: RE: HP & Compaq -> > -> > -> > Sounds like you need to think about using STP shielded -> > cabling if you have -> > that much noise on the LAN. -> > -> > -> -----Original Message----- -> > -> From: owner-classiccmp(a)classiccmp.org -> > -> [mailto:owner-classiccmp@classiccmp.org]On Behalf Of -> > Douglas Quebbeman -> > -> Sent: Thursday, September 06, 2001 7:21 AM -> > -> To: 'classiccmp(a)classiccmp.org' -> > -> Subject: RE: HP & Compaq -> > -> -> > -> -> > -> > > They BOUGHT it...BOUGHT != KILLED. Now Tulip chips have -> > -> Intel logos -> > -> > > on them. At least I'm pretty sure I've seen some...it may -> > -> have been a -> > -> > > nightmare or something. ;) -> > -> > -> > -> > Those el-cheapo Linksys cards that I like because the -> > newer ones rarely -> > -> > fail on me and when they do they are cheap to replace, -> > are Tulip. And -> > -> > they're faster because of it. -> > -> -> > -> I hope you don't mean the EtherFast 10/100 LNE100TX -> > cards... they are -> > -> *way* too sensitive to noisy LANs... I've had to pull -> > several and replace -> > -> them with either Intel Pro/100 adapters, or drop back to -> > some old 3Com -> > -> 3c509 10Mbps combo cards... Of course, YMMV, etc... -> > -> -> > -> -dq -> > -> -> > ->