26 Oct
2015
26 Oct
'15
10:03 a.m.
Hi Toby,
I'll try to post some photos in a week or 2. Rob has asked me to make some
internal load boards for him so I can show more details while I'm at it.
The bulb is the best option in my opinion and seems to work just fine
without additional cooling in the cube.
--
Brian
On Mon, Oct 26, 2015 at 6:43 AM, Toby Thain <toby at telegraphics.com.au>
wrote:
On 2015-10-26 1:02 AM, Brian Archer wrote:
Even a 10W resistor will get really hot. I embed
two 5W resistors into a
pentium class CPU cooler for a good compromise on space/thermal concerns.
You can see a pic on my site here:
http://asterontech.com/Asterontech/next_adb_conversion.html
Hi Brian
I did see your mod while looking around for info.
I'd prefer not to mod the soundbox so my options seem to be your internal
backplane load board (
http://www.nextcomputers.org/forums/viewtopic.php?t=3616&highlight=load…
) or maybe a small load board inline to the monitor cable?
It looks like ambient cooling is sufficient for the version shown here?
Thanks very much for the excellent info you've posted so far!
--Toby
Internal to the cube, I've found using a 5W appliance bulb to be the
easiest.
--
Brian Archer
\