PDP-11/24 bootup w/9312

Anybody have a newer M9312 tech manual which describes the S1 settings for this beast? The boot ROM (in U20) is a 23-774F1 and I'm trying to boot RL01's and RL02's (device boot ROM -751A9). My manual is EK-M9312-TM-001, so it's the first edition. I'm unsuccessful in getting this machine to boot even though it had been said to have worked before I got it. Hardware config is the same as when I got it but I want to just make sure I was told correctly that it worked. Have to verify S1 switch settings as a beginning. Flipping the Halt/Cont/Boot switch to Boot causes some flickering of the RL02 drives' Ready light as if there could be some activity. But it stops after about 20-30 seconds and the VT100 shows just "@01000000" and is locked. Manual booting by entering 173000G just shows some register info such as "@ 1010" on the next line. Could I get a copy of somebody's latest edition of the tech manual. I'll of course pay all costs. Thanks for the help! -- Chris -- -- Christian Fandt, Electronic/Electrical Historian Jamestown, NY USA cfandt(a)netsync.net Member of Antique Wireless Association URL: http://www.ggw.org/freenet/a/awa/