4 May
2004
4 May
'04
1:16 a.m.
At 04:09 AM 5/4/04 +0100, you wrote:
That would be cool! I have four or five 9845s but I don't think any of
mine have that option.
What do you have in the far right slot? Is it a single PCB with an HP
metal-heatsinked hybrid on it, a set of 3 boards, or what?
I can't tell you at the moment. Mine are all in storage. I sort of lost
interest in them. They're a PITA to keep working and take up too much room.
If anybody wants one come and get it. I have several and I don't think I'm
going to bother with them any more. I will not ship!!! These are big, heavy
and awkward!
They're not at all common in the UK...
IIRC the main circuit board has a connector but IIRC you have to add the
mating connector along with the cable. However I've been lucky and found a
fair number of modules with the cables already installed. However I think
they're all new. I don't think I've ever found one that had been wired up
to anything.
That's interesting. I hadn't looked that close at the workings of the
time module and had no idea that it was built that way. I wonder why it
included all of that?
There are
unless you got the optional Hi-Performace bit-slice CPU. One
I think I may well have that.
Incidentally, the 9845 has one bit of bad design, IMHO. It's not trivial
to dismantle. To take off the top cover you have to remove the 2 little
metal latch brackets for the montior first. And you have to remove the
keyboard/tape drive assembly to get the cards out, they just don't clear
the back edge of it when the keyboard is screwed down. Oh well...
I agree that it could have been better. The 9845s are very unreliable.
I'm having to constantly reove, clean and reseat the cards in order to keep
them working.
I know
little of the history of my 9845, other than when I got it it came
with 2 8" drives, a few 16 bit parallel interfaces, 3 HPIB interfaces
(!) a real time clock at least one RS232 interface and the rather
hard-to-find 9878 expansion chassis.
hard to find? Sheesh I find them all over. nearly every 9825 that I find comes with one. I just passed one up in a scrap
yard a couple of weeks ago.
Also passed up a couple of the RTC modules. The RTC modules with the IO
cable are cool. You can interface them to external devices and trigger the
All the clocks have the connector and logic for the external interface,
it's just a cable you have to add. devices or use the device to trigger events in
the 9845.
YEs..
That clock is one strange design. When the machine is powered up, the
clock is done in software on the HP microcontroller inside. But there's
also a digital watch chip (!) which is battery backed and used to keep
the time when the machine is powered down.
The interface to the watch chip is what you might expect. a couple of
'buttons' for things like selecting the time/date, setting the clock,
etc, digit strobes (outputs from the watch chip) and the 7-segment
outputs (one of which isn't used, since the microcontroller can identify
the digit without it). I think there's also an annunciator output, which
means there are only 3 digit strobes (the most significant digit is
either blank or 1, both for time and US-style date, so you just need a
single line for it, rather than a complete digit.) You can actually
attach a 7 segment display to traces on the board and get it to display
the time when the clock module is starting up.
Incidentally, the clock testpoint mentioned in the manual is one of the
digit strobes. That's why it's a division of 3 from a power-of-2
frequency. And that's what 'gave it away' when I was sorting out just
what was going on on that board.
The clocks are fairly common, ones that have not been damaged by battery
electrolyte less so (but they can generally be repaired). 16 bit parallel
interfaces are really common, but the versions with particular I/O
cables, other thnn the Option 085 one for the 8" floppy are much rarer. I
am still looking for wire- and jumper- lists for all the optional cables.
So am I. I think I have one or two of them but that's all.
Have you seen a metal-cased I/O module for these machines? One of my HPIB
interfaces is in a die-cast case, not a plastic one.
Yes I've seen several of those. I've heard of something called
"Tin-roof"
or somesuch and it think it referred to those. I think it was a change to
make them comply with some new RFI emissions requirements. I had some
messages that referred to it but I lost them when my HD crashed.
Joe
-tony