26 Apr
2000
26 Apr
'00
5:44 a.m.
----- Original Message -----
From: Ernest <ernestls(a)home.com>
To: <classiccmp(a)classiccmp.org>
Sent: Wednesday, April 26, 2000 6:08 PM
Subject: Opening CP/M files (.asm/.bas)
I have an Apple II with a Z80 card, and lots of CP/M
disks for it but I'm
having a problem opening the .ASM and .BAS files. I thumbed through a book
on both Mbasic and CP/M but neither of these books clearly describe how to
work with these files.
The Mbasic books says to open Mbasic, and at the "OK" prompt type RUN
"B:MAINT.BAS" (for example)but when I do that, it gives me a "Direct
Statement in file" message, and then it goes back to the "OK" prompt.
See if you can edit the .BAS file with an editor (Only a ASCII .BAS file
can contain a direct statement) Then edit out the offending statment and run
it. I don't see how a tokenized .BAS file could be saved with a direct
statement.
For .ASM files you need an assembler and linker/loader program to generate
the object code (usually a .COM file). Look for another program like ZASM.COM
that may be the assembler.