1 Jul
2000
1 Jul
'00
11:57 p.m.
From: Chuck McManis <cmcmanis(a)mcmanis.com>
I'd recommend a nice ESDI controller (Dilog 696-20
or RQ11D/E
(Webster/Sigma/etc) If you can find a RRD-40 interface (CD-ROM) that
would
be good to since VMS from CD is easier to load than VMS
from TK50
(having
done both recently I really recommend CD). If you can
find (good luck!)
a
SCSI controller for it then your options are pretty
much wide open. BTW
VMS
lives very nicely on a 500 - 600MB disk with lots of
layered products.
Chuck, a SCSI board with one good drive and a CDrom would be likely a
better
choice depeding on what can be found. I used this combo CMD200, RZ56
and toshiba Cdrom.
Allison