16 Oct
1998
16 Oct
'98
2:03 a.m.
At 01:29 16-10-98, you wrote:
Hans,
DataI/O is the lousy about supporting the older equipment. I have a
model 29 and a 2B module. I do have instructions for the 29 but not for
the module. The 29 can be programmed from a computer by simple data
transfer via Rs-232. Or you can use the keypad to enter all the data or to
modify the data. BUT you need the instructions for the module since they
include the code numbers used to identify the various EPROMS to the
programmer. Without those codes the programmer is useless.
The codes you refer to (Family/Pinout) are contained in the 'wallchrt.dos'
file, available for free download from Data I/O's web site (www.data-io.com).
FWIW, I checked with DIO yesterday on reading the old 1702 with a UniSite.
They don't even have the device listed in their "obsolete" section. I guess
it just goes to show one how far back it goes.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Bruce Lane, Owner and head honcho, Blue Feather Technologies
(Hamateur: WD6EOS) (E-mail: kyrrin(a)jps.net) (Web:
http://table.jps.net/~kyrrin)
SysOp: The Dragon's Cave (Fido 1:343/272, 253-639-9905)
"Our science can only describe an object, event, or living thing in our own
human terms. It cannot, in any way, define any of them..."