20 Feb
2018
20 Feb
'18
4:06 p.m.
I'm on the western side of the state, mid-way up, 5 minutes from the Ohio
line.
I have an old church building with maybe ten pdp11s and VAXen and would
like to host a pdp11 programming / work session / mixer someday if I can
get the space into a presentable state!
On Tue, Feb 20, 2018 at 6:42 PM, Bill Degnan <billdegnan at gmail.com> wrote:
Where in PA? I live on the south -eastern corner near
the u of Delaware (
Newark, del.)
Bill
On Feb 20, 2018 6:07 PM, "Jacob Ritorto via cctalk" <cctalk at
classiccmp.org>
wrote:
Hi Aaron,
I have some extra RL02 packs and would be glad to lend you a pack for
free if you like; maybe for keeps. But you're probably not on the same
continent as me, so shipping would probably be costly. If you have no
better offers, let me know and we'll work it out. Can also put bits on it
if it'd be advantageous to have something written on it beforehand.
--jake (in Pennsylvania, USA)
On Mon, Feb 19, 2018 at 6:03 PM, Aaron Jackson via cctalk <
cctalk at classiccmp.org> wrote:
to
>
> I posted some pictures of the process here:
>
> http://aaronsplace.co.uk/blog/2018-02-19-repairing-crashed-
RL02-heads.html
>>
> Looking at the pictures of the heads before and after I am struggling see
a difference. What am I looking for?
Regards
Rob
If you click on the image and load the full sized image, you should be
able to see some orange stuff from the coating on the platter on the
heads. There isn't a lot, but it was enough to crash when I loaded a
pack it seems. Cleaning with IPA and swabs, without the heat, wasn't
enough to get it off.
Best,
Aaron