1 Jan
2022
1 Jan
'22
12:27 p.m.
On 1/1/22 1:50 PM, W2HX via cctalk wrote:
True. But if you're trying to get > $5000 for
something, it doesn't seem unreasonable to suggest that investing a bit in getting an
extension cord run to the location of the machine would be a good idea. The absence of
that effort makes me wonder if the owner knows what the outcome of such a test would be
and doesn't want to have to report it.
But what would that accomplish? I think testing something like this requires a lot more
effort than plugging it in and hitting the circuit breaker. To test this to see if some
ODT comes up probably requires quite a lot of effort (locate a terminal/pc, wire it up,
figure out where to plug it into the 780, etc. If this guy is a bulk dealer I would be
surprised if he has the knowledge to do anything more than a power test which, again,
would not be very useful and could even be detrimental.
The /780 needs a readable "console floppy" and working
drive.? It loads microcode from the floppy and runs some
power-on self-tests before even starting the VAX CPU.? Not
real likely the floppy is going to be in good condition or
the drive, either.? Also, the cooling blowers below the
circuit boards are likely to be seized and need new
bearings.? Not to mention the cap banks in the power
supplies at least need to be re-formed.? Likely, this
machine has not been turned on since 1990 or so, (just
guessing).
Jon