Pete wrote
Not normally. I've never seen one with anything over the
top, except for one in a tabletop case, of course; and the
drawings don't show anything of the sort. I can't see how
you'd fasten any sort of top cover.
I have RX02's rack-mounted with a top cover.
However, the top cover is *not* attached to the RX02 drive.
It is separately mounted just above the drive in the rack
by 2 standard screws at each side to the vertical post.
Sort of "dust cover".
- Henk.
This message and attachment(s) are intended solely for use by the addressee and may
contain information that is privileged, confidential or otherwise exempt from disclosure
under applicable law.
If you are not the intended recipient or agent thereof responsible for delivering this
message to the intended recipient, you are hereby notified that any dissemination,
distribution or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the sender immediately by
telephone and with a 'reply' message.
Thank you for your co-operation.