23 Nov
2012
23 Nov
'12
11:58 p.m.
On Thu, 22 Nov
2012, Scott Quinn wrote:
I doubt it, given that (a) my Weeler TCP is normally used at 700F or 800F
(depending on which tip I fit) and (b) an emergenice repair to a (food
cooking) oven element involing some soft-soldering of the wire end held
fine for a few hopurs at around 400F. My plan was to ramp it up to 400F in an oven,
soak for 5 mins, then
cool
down to minimize thermal issues. Does this sound good?
Is 400 degrees anywhere close to hot enough?