CompuPro and 86-DOS

This last weekend I pulled my old rack mount CompuPro system out of storage and cleaned it up. The last time I used this system was about 15 years ago and I only used it to edit my resume in Wordstar. The system consists of: a "CPU 8085/88" a "DISK 1" controller a "SYSTEM SUPPORT 1" for the console two "RAM 16" boards for a total of 128K and two Qume 842 8" floppy drives After one small capacitor fire I had the system up and running. I went through all of the 8" diskettes I could find to determine what would boot. So far, I have bootable disks for CP/M 2.2, CP/M 86, and CP/M 8-16. But the disks that I really want to read are in 86-DOS format according to the label. I have disks that claim to be 86-DOS boot disks but they wouldn't boot. Some of these disks I'm having problems with appear to be SSSD 26 sectors/ 128 bytes if that helps. Can anyone point me in the direction I need to go in order to be able to boot 86-DOS? Regards, --Doug ========================================= Doug Coward @ home in Poulsbo, WA Analog Computer Online Museum and History Center http://www.best.com/~dcoward/analog =========================================