HHC Basic memory problems

I think I have this problem figured out. The RL-H1400 has only 4k of memory. If you press the I/O key after a cold start you'll find that you have around 3123 bytes of memory free. If you then enter Basic and type in a one line program, say: 100 print "hello" and then press the clear key to get back to the top menu you'll find you have only about 2 bytes free. If you try to reenter Basic you get the error message about not enough memory. You'll also notice that the filesystem has a file called "B". That must be the Basic workspace. It seems to take up pretty much all of the available memory and it is why you can't create any more files after having run a Basic program. The solution seems to be to type the "bye" command to exit Basic rather than just pressing the clear key. This must free up the workspace before exiting. If you do that after having typed in the one line program above you'll find that you still have around 3098 bytes left. You should then be able to reenter Basic and select the file you saved the last time and run it again. So, it looks like I have Basic working. I still haven't been able to find any information on SNAP though. I have seen some references that suggest that only the SNAP runtime is built into the HHC. Apparently, development was done on another machine. I would still be interested in finding a description of the SNAP language and maybe documentation on the runtime if anyone has any. David