30 May
2010
30 May
'10
11:26 p.m.
On Sun, 30 May 2010, Tony Duell wrote:
Can you explain the set-up, please. What is connected
to what, and where
the PSU is connected to (the A500 mainboard, right)?
Here's a picture of the board (well *A* board):
http://amiga.resource.cx/photos/dataflyer2000plus,5
Mine has the memory expansion conector installed.
The A500 works fine with this card installed. I did more checking and it
appears that there's a short between +5 and ground. I removed all the
chips to eliminate them as a potential cause and it's still reading as
shorted. The only components left on the board at this point are the
resistors, a pair of electrolytic caps and a pair of what I think are
tantalum caps.
Thanks for the suggestions Tony.
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.simpits.org/geneb - The Me-109F/X Project
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!