21 Jul
2015
21 Jul
'15
8:52 p.m.
----- Original Message -----
From: "Tothwolf" <tothwolf at concentric.net>
To: "General Discussion: On-Topic and Off-Topic
Posts" <cctalk at classiccmp.org>
Sent: Tuesday, July 21, 2015 9:46 PM
Subject: Re: PDP 11 gear finally moved
Maybe it isn't much money in your world,
especially when someone else is paying. I just
priced the main power supply caps in one of my
Cromemco systems and it comes to ~ $120 (and all
special order of course); if I replaced all the
caps in all my (working) systems as you and a few
others are suggesting across the board regardless
of the system, condition etc., it would easily
exceed $2000 if I could even find suitable
replacements. And what about those prone to
explode tantalums while we're at it...
If you're recapping 20-year old or newer circuit
boards for customers as you apparently are then it
does indeed often make sense to replace all the
aluminum electrolytics, especially if the board
has problems or there's visual evidence of
failure, but let those of us with older,
well-working systems use our _judgement_ whether
to replace or not. OK?
To each his own...
They reliably do what they're supposed to do.
m
On Tue, 21 Jul 2015, Mike Stein wrote:
...
FWIW I'm
certainly not about to spend 100s of
dollars, not to mention time spent in sourcing
and replacing, to replace the caps in systems
100s? Where are you sourcing your components
from? The typical board I rebuild has a
component cost of about $20 or less. Smaller
switchmode PSUs with a bunch of 10-18mm radials
might be closer to $35-50. Larger PSUs /might/
cost closer to $100 if they have several large
screw terminal capacitors in them. All things
considered, that isn't very much money in
today's dollars, and considering the full
replacement cost of some of these boards (if
they are even available), those preventive
maintenance costs are an absolute bargain,
/especially/ if you are doing the work yourself
on your own time. that are
running perfectly "just in case"...
How do you -know- they are "running perfectly"?