18 Jan
2018
18 Jan
'18
9:36 p.m.
Will, I wasn't aware the CW MK4+ had a legacy floppy controller on it
(i.e. ports 3fx, DMA 2, IRQ 6 setup with NEC 765 command set). The CWs
that I have (a MK3 and a MK1) are all sui generis devices not supported
by off-the-shelf software. In particularly, I don't think they'll work
with, say, IMD, or AnaDisk.
--Chuck
On 01/18/2018 01:17 PM, william degnan via cctalk wrote:
Does someone have results for the Siliconsonic /
Individual computers
Catweasel MK4 plus? IF not I will put that on my list of to-do's.
I added a link to this onto my web site in the links section and the
archiving info thread.
Bill
On Thu, Jan 18, 2018 at 3:46 PM, Adrian Graham via cctalk <
cctalk at classiccmp.org> wrote:
--
--Chuck
Sent from my digital computer
On 18 Jan 2018, at 15:46, systems_glitch via
cctalk <
cctalk at classiccmp.org> wrote:
I'd been trying to reach Dave Dunfield with new TestFDC results since
apparently August with no results. So, I wrote a new TestFDC registry
into
Gaaaah, talk about the wrong timing for this XD. I say this because I just
bought an AHA-1524CF on various folk?s recommendations (not from here) a
couple of weeks ago only to find I still couldn?t really manipulate SSSD
images then tonight I read a message on VCFED from our own Chuck Guzis
saying there were two controller chips in the 1542CF (national and broken
Intel) and I discovered I had a broken Intel one.
I may have cussed.
Typically all the AHA-1522s are in the US, sigh.
Cheers,
?
Adrian/Witchy
Binary Dinosaurs - Celebrating Computing History from 1972 onwards
w: binarydinosaurs.co.uk t: @binarydinosaurs
f: facebook.com/binarydinosaurs