10 Jun
2003
10 Jun
'03
3:59 a.m.
--- tim <tim_goober(a)hotmail.com> wrote:
I have a Slt 286 that powers up fine and was working
fine. it has lotus,
and word on it and when i turned it on today it says insert setup disk
into a: and there is no way for me to get around it. i can't get to c:,
please help
Sounds like your Dallas clock battery has died.
I was unable to get my SLT 286 to work until I located a replacement.
IIRC, it's a DS1287, but they are not available new because they have
a Y2K bug. There is a "modern" replacement part, but I have not tried it.
It's a sealed unit, so it's not possible to "change" the battery.
Excavation might be an option, but the case of the SLT is so tight
that when I installed a low-profile socket in mine (to accept the
"new" DS1287), I had to trim the aluminum shrouding that defines the
bottom of the battery case to let the Dallas chip pass through (my
SLT 286 never had a battery - mine is permanently affixed to its
docking station for power). Whatever solution you attempt must
not elevate the Dallas chip in any way, especially not by having exposed
leads higher than the chip package.
-ethan
-ethan