10 Apr
2001
10 Apr
'01
7:17 p.m.
----- Original Message -----
From: Ethan Dicks <ethan_dicks(a)yahoo.com>
To: <classiccmp(a)classiccmp.org>
Sent: Tuesday, April 10, 2001 1:21 PM
Subject: Re: Kim / Commie keypads
--- Richard Erlacher <edick(a)idcomm.com> wrote:
particular
It's pretty hard to tell whether it's the
keypad or the circuit that's
malfunctioning. How did you determine it's the keypad itself?
Looking at the schematic, it appears to be a simple matrix. Short a X and Y line for the questionable key. If it
"strikes", it's the keypad.
If it still flakes out, it could be a component or trace.
Right. It's a 3 x 7 array with 2 keys wired to a 556 for ST (step) and
RS (reset).
I've already tested the broken keys via the edge connector, and they're
working fine. Not that there was too much doubt, as the buttons
involved are either caved in or "feel like they're not connecting
with anything". So a 3x7 + 2 switch setup should do the trick,
but what would look good.
-ethan
=====
Even though my old e-mail address is no longer going to
vanish, please note my new public address: erd(a)iname.com
The original webpage address is still going away. The
permanent home is: http://penguincentral.com/
See http://ohio.voyager.net/ for details.
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/