2 Mar
2008
2 Mar
'08
5:54 a.m.
"Zane H. Healy" <healyzh at aracnet.com> wrote:
It sounds like you have the audio only A/V modules.
This is what I have
in both of my SGI O2's. :^(
Hmm, the video connectors and all the major components are in place, and the board has the
number 030-0728-004 on it - Gerhard Lenerz's SGIstuff page says this is an O2
Audio/Video Board (Audio only module would be 030-1145-XXX).
Hinv however only detects the board as "Audio: A3 version 1" so the video
circuitry must have been disabled somehow. Perhaps there's something to be done about
it: There are a few open resistor lands next to the edge connector (R503, R504, R505;
R510, R511, R513, R514) and along the lower edge of the board (R556, R557, R558; R569,
R573, R575, R576; R587, R593) and three SMD inductors (L512, L513, L514) missing on the
solder side.
So long,
Arno Kletzander
--
Arno Kletzander
Student Assistant // Studentische Hilfskraft
Informatik Sammlung Erlangen
www.iser.uni-erlangen.de
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer