6 Nov
2004
6 Nov
'04
4:25 p.m.
And thusly ghldbrd(a)ccp.com spake:
This one doesn't boot up. :( It starts up for a little bit, then the power
light flashes a # of times. I have googled for POST error messages but
could not find out what this meant.
Also, did I read somewhere earlier that soldering to a battery is a VBT?
(Very Bad Thing) ;)
Thanks!,
Bryan Pope
I am currently in the process of replacing my Amiga 2000's battery... On
the
one I was finally able to remove there *seems* to be some damage to the
circuit board that was underneath and nearing the 68000. Instead of the
circuits being a nice green colour, it is now black. Is there any way to
tell if this is only a colour change? Also, it looks like some of the
copper has been eaten away around where the negative part of the battery
was soldered to the motherboard.
sounds like the battery acid leaked out and started eating away. Only way
to know if damage has been done is to see if the board still works (boots)
or not. You can't really clean it off without doing some damage to the
traces.
I have cleaned all of the white crap off with vinegar and a toothbrush. I
then used "Precision Electronics Cleaner" from RS which is _supposed_ to
leave no residue.
Also, how are the solder tabs affixed to the battery? The replacement
batteries I got don't have any.
The tabe are usually spot welded on. Most cells are designed to go into
some sort of holder that has contacts. You might have to rig up a battery
with pigtail leads and attach that to the mobo, with the battery stuck on
somewhere with RTV or other adhesive.