Parting out basic -xKx IBM PS/2 90 XP. Too heavy to ship intact.
Condition is VERY CLEAN and like new on all parts. Was pulled down
working NT 4.0 workstation.
Pair of memory risers (no ram) and black clip also used to hold
ferrite bead for scsi. It is later version so no problems there, met
the ECA recall.
Processor complex card -xKx w/ DX2 66 and heatsink attached not DX33
and 256K cache daugtherboard. Blue shround included for direct
air through complex and cache, that is required because both parts
runs hot typical for these. ROM is later version for HD up to 4GB
instead of 1GB, still have old ROM for it.
Planar (motherboard) w/ 512K vram installed, all socketed.
PSU, a brace w/ thumbscrew and 3 screws for it. Heaviest part of
all. Keep that in mind on shipping.
Pair of brown strips w/ 4 screws. It will break if someone
forces open that top cover. The hooks is inside that brown strips to
engage the top cover.
Also I have top cover as well w/ bezels
installed, it is for a floppy and one blank bezels.
One RF screen tin sheet partially covers the upper, right opening.
Brown structure to hold scsi cable, cards, partially insolates
motherboard (slots area) from bottom pan, has 2 screws for
bottom and two screws w/ washers for 90mm fan (not included). That's
where blue deflector is held.
Spreaker and power switch, LED in a structure w/ cable attached w/
one screw.
1.44MB floppy with rail (FRU: 64F0162), cable for it.
Busmastering SCSI 32bit MCA w/ 512K and interal scsi cable w/
ferrite bead. Card is 85F0063 and ROM is F2244/F2245 for handling
large capacity drives. Terminator pack installed.
3 rubber feets. Fourth one was missing when I got that computer.
Pile of black screws for that PS/2 machine.
Offer small cash, you claim what you want and you pay shipping for
any of these parts, you got it. First one to claim is first served.
Or trades, I pay shipping out to you on parts you pay shipping parts
I wanted: wants: Mac parts like Nubus or LC ethernet and doodads for
Mac.
Cheers,
Wizard