22 Feb
2009
22 Feb
'09
12:32 p.m.
Tony Duell wrote:
If this were my system,. I think I'd modify that
8050 to ignore IFC.
Personally, I'd sooner get a couple of IDC IEEE-488 connectors and some cable,
crimp the connectors on the cable (wired 1-1, 2-2, etc.) then separate the IFC
wire from the rest of the bundle (I'd pick a bit in the middle, say 2in long).
Cut that wire dead in half, continuity-check the cable, then cut the IFC wire
down to a more respectable length once all the checks pass (or solder it back
together if it turns out you cut the wrong wire).
--
Phil.
classiccmp at philpem.me.uk
http://www.philpem.me.uk/